Speaker Stands fixtures - high grade / SOTE /

Stands are small sound units intended to be placed on stands. Used different types of wood - dried under natural conditions 8-10 years. Lower and upper bases are from stainless steel. The legs are able to assume a displacement of 10 mm.
st.5
st.7
st.4
Speaker Stands bodies - medium / SOTD /

Stands are for  small sound units intended to be placed on stands. The main trunk is made of wood / clear / showing the seven layers high polish. Lower and upper bases are from stainless steel - 12 / 8 mm. Possible other accessories
DSCF2758
DSCF2779
DSCF2637
DSCF2756
DSCF2770
DSCF2626
Speaker Stands bodies - medium / COTT /

The stands  are designed for small speakers. The bottom base is a natural mineral with a thickness of 30 mm. The upper base is made of steel - 8 mm. The wood which is used is ash, dried for eight years under natural conditions. The stand is in contact with the floor by means of  steel wedges which are using and for  levelling. The contact with the speaker is done by steel pellet also there are provided and steel wedges. Eight thin layers of high quality lacquer are applied.

DSCF3054
DSCF3096
DSCF3108
DSCF3147
DSCF3074
DSCF3613
DSCF3657
DSCF3570
Speaker Stands bodies - high grade / COTCH/

The stands  are designed for small speakers almost the best quality that the  company can  offer. The bottom base is a natural mineral with a thickness of 50 mm. The upper base is made of steel - 8 mm. It is  been used different types of wood which has been dried under natural conditions 8-10 years. The stand is in contact with the ground through the pins, which serve as leveling. The contact with the speaker is done by steel pellet , also there are provided and steel wedges . Twelve thin layers of high quality lacquer are applied.

Speaker Stands bodies - low grade / COTP/

The stands  are designed for small speakers. The wood which is used is spruce. The pins / steel wedges / are able to take displacement of less than 10 mm.


DSCF3373
DSCF3400
DSCF3384
Foundation for speakers

Designed and constructed for  VILNER STUDIO for speakers of limited edition HI-END system - RIMAC SOUND SYSTEM. Constructed from  12 mm steel securing  double base. Pins  allow taking displacement of the floor. Solid locking caps.

ik1
ik2
vilner
WWW.6MOONS.COM/VILNER
Foundation for speakers 

Complete makeover of Arcus AS 50. Internal and external processing. Replacing the rear cap and a massive new high quality connectors with short signal path are mounted/ pat.N 002184341 /. Changing the internal wiring / VDH /. Basis of natural mineral / 50 mm / and suspension of solid steel cross supports. Stand is with contact with  the floor by legs that serve and for  leveling.
DSCF4960
DSCF4976
DSCF4987
DSCF4908